Cryptex V2
Cryptex V2
Published 2018-10-15T11:40:11+00:00
print :
1x tete
1x corps
1x languette
4x tour
4x roue
5x rondelle
Assembly:
1) insert "roue" and "tour" together, positioning the slot of "roue" in front of the digit you want to set. (x4)
2) insert first "rondelle" on "corps" (check alignement, slide all the way down and rotate to align the slots).
3) insert first "roue"/"tour" assembly.
4) repeat steps 2 and 3 till all four wheels are in place.
5) insert last "rondelle" and lock it (check slots are aligned).
6) rotate all wheels so all wheels slots are aligned to the slot on the back. (see "Final" picture), and slide down the "languette".
7) Set the code using the wheels , you can insert the "Tete".
If you want to change the code, proceed in revert order. A needle can be used to remove the "languette" to lift it.
Date published | 15/10/2018 |
Technology | FDM |
Complexity | Easy |