Flashforge Dreamer Fan Upgrade
3,477
views
93
downloads
0 comments
Loading comments... 
Flashforge Dreamer Fan Upgrade
3D
Published 2019-06-23T19:30:15+00:00
3
0
Add to Collection
Description
I removed the rather noisy stock 80mm fans from my Flashforge Dreamer. The upgrade allows mounting two standard 120mm, 12-volt PC fans which are usually much more silent. In the picture, they are running off an external 12-volt power supply but the later I connected the fans directly to the printers internal 24-volt supply using a cheap buck converter to reduce output.
Mounting is best done with M3 screws.
License
Printing Details
Can be printed without supports in PLA.
Layer height 0.18mm.
Infill is set to 15%.
Speed at 80mm/s.
Technical Information
| Date published | 23/06/2019 |
| Time to do | 4 - 30 minutes |
| Material Quantity | 60 gramms |
| Dimensions | 120x120x50 |
| Support Free | YES |
More Information
Object Parts
