IPA3D Multi-llavero hexagonal amurable / IPA3D Multi- hexagon keychain with wall support
IPA3D Multi-llavero hexagonal amurable / IPA3D Multi- hexagon keychain with wall support
Published 2018-12-08T03:12:13+00:00
Honeycomb wall support with space for up to 8 hex keychains.
Print 3 'plug.stl' and glue to the back of the support using CA-Glue (Superglue), since it will be the anchor point for wall-mounting.
Slight cleanup with razor blade may be needed in the down-face of the hex keychains if your printer is not perfectly calibrated, since it may squish the first layer slightly.
Fits small cable ties perfectly, also medium metal key-rings.
Designed fully inhouse by Ismael Salgado for IPA3D Buenos Aires using Autodesk Fusion360.
________________
Soporte de pared en patrón panal con espacio para hasta 8 llaveros hexagonales.
Imprimir 3 'plug.stl' y pegar con cianoacrilato (La Gotita) en el fondo del soporte, será lo que permita atornillar el soporte.
Es posible que los hexágonos deban ser emprolijados con una hoja de afeitar/cutter en su cara de impresión si la calibración no es perfecta (ya que se expande levemente la base).
Funciona perfecto con precintos finos, también se puede usar argollas metálicas medianas.
Diseñado íntegramente inhouse por Ismael Salgado de IPA3D Buenos Aires vía Autodesk Fusion360.
0.23mm for everything, will work lower/higher. Do not print >.5mm layer height.
Base printed in PLA, keychains ABS and HIPS. Any should work just fine.
Do not go lower than 5% or higher than 80%
___
0.23mm para todo, funciona bien con capas de mayor/menor resolución. No exceder .5mm de resolución.
Base impresa en PLA, llaverros en ABS y HIPS. Cualquier material debería funcionar bien.
No usar menos de 5% infill ni más de 80%
Date published | 08/12/2018 |
Material Quantity | 57g |
Dimensions | 125x80mm max. DO NOT SCALE / NO ESCALAR |
Support Free | YES |