JB's Simple Cufflinks
2,454
views
69
downloads
2
collections
0 comments
Loading comments...
JB's Simple Cufflinks
3D
Published 2015-07-31T09:39:36+00:00
7
0
Add to Collection
Description
This is simple cufflink model.
You can be the actual wear by printing. Because I had to modify a little bit after the actual wear.
When the output from cheap equipment, the tail may not come out well. (If you get good results I hope you try below 0.1.)
Sample image is printed by FDM, But I recommend you printed by FDM.
Printing Details
Print at 0.2 mm layer height, with 10% infill. This uses 18 g of filament and takes 2 hours 25 minutes.
Technical Information
Date published | 31/07/2015 |
Material Quantity | 18g |
Dimensions | 60 x 72 x 40 mm |
Complexity | Easy |
Support Free | YES |
More Information
Object Parts