Q1 mini Quadruped Robot 2.0 (Designed by Jason Workshop)
Q1 mini Quadruped Robot 2.0 (Designed by Jason Workshop)
3D
Published 2017-05-18T08:52:04+00:00
Q1 mini is an open source quadruped robot for everyone!
- Simple design, easy to print and assemble.
- 8 DOF using SG90 servo.
- All-in-one controller board - LinkIt 7697 with Robot Shield and built-in battery.
- Remote control the robot through mobile apps.
Parts:
3D Printed parts (29 Pcs)
LinkIt 7697 with Robot Shield x 1 set
TowerPro SG90 Servo x 8
M1.7 x 8mm Screw x 60
Demo:
http://youtu.be/PH81_TxiiXE
Instructions and downloads:
http://q1.jasonworkshop.com
Q1 FB Page
http://www.fb.com/q1.jasonworkshop
Q1 Store
http://store.jasonworkshop.com
Jason Workshop
http://www.jasonworkshop.com
http://www.fb.com/jasonworkshop
Recommended to use a FDM 3D printer with PLA material. You can print individually piece by piece to match the colors of the original design or optionally print all at the same time.
| Date published | 18/05/2017 |
| Time to do | 12 - 24 minutes |
| Material Quantity | 99 |
| Dimensions | 160 x 150 x 70 |