KS1SOS32 – Swamp Barges
$1.00 KS1SOS32 – Swamp Barges
Published 2020-12-27T11:33:22+00:00
Included in this set of 3d printable scatter terrain you will find three 3d printable .STL files. These swamp barges allow for awesome riverine adventures encounter options. A special thank you to Jeromy K Smith for the artwork on this set.
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
TERRAIN RECOMMENDED PRINT SETTINGS
● Layer Size: 0.15mm minimum. 0.1mm recommended.
● Infill: 10% for all models recommended
● Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
● Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
● Raft/Brim/Supports: Brim may be helpful when printing small items like the Lever or Doors.
Date published | 27/12/2020 |
Price | $1.00 |
Support Free | YES |
A 3 hour tour! Jeromy K Smith was kind enough to create this beautiful hags skiff! Painted by Windy Trusty