Lampshade 'Dizzy'
Lampshade 'Dizzy'
3D
Published 2018-10-29T16:12:05+00:00
This lampshade is a double curved shape 3D printed in the vase mode.
So you can use the vase mode also for another product than a vase.
This may give you some ideas about homemade lamp shades for decorating your home.
The hole in the bottom is Ø41mm, the lamp is Ø55mm.
Don't use too hot bulbs near the plastic!
🎞 Video: https://youtu.be/FRVSJA4WFeE
⚠ Usage of any models from 3DParts4U will be at your own risk!
⚙ My PETG Simplify3D print settings:
- 3000mm/minute (50mm/second)
- hotend 215°C | bed 70°C
- 250 micron | infill 0% (vase mode)
- 0 top layers | 6 bottom layers | vase mode
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 100%
- no support needed
| Date published | 29/10/2018 |
| Support Free | YES |
