Link - Breath of the Wild
Link - Breath of the Wild
3D
Published 2017-05-31T14:49:57+00:00
A model of Link from Breath of the Wild. I designed and created the model except for the Master Sword, scabbard and slate. The following were uploaded by users on Thingiverse: The sword comes from Darian_Getter and the scabbard from esseff3D. The slate was made by Elcrys.
I increased the size of the pieces by 70% in the slicer so that the size of the entire model would be around 7 inches. I'd love to hear of other sized print success if anyone does that. I'll soon attach a model with all the pieces combines into one sculpt, but I preferred to print them separately and glue and post-process. That way I could control the supports on each piece.
I had issues printing the scabbard. You can print the scabbard file twice and glue them together, but mine failed. Working on fixing it- let me know if you figure out a good way to print it. I plan on making the bow and ancient arrow sometime in the future.
I used Simplify 3D as the slicer, and Kodama Aluminum PLA filament.
Let me know if you come across any problems. I found the best printing success when tilting the parts back a bit on the slicer.
| Date published | 31/05/2017 |
| Time to do | - 2700 minutes |
| Dimensions | 101.6mm x 177.8mm x 101.6 mm |
| Technology | FDM |
| Complexity | Medium |