Lisa Menorah
$5.50 Lisa Menorah
3D
Published 2018-08-31T10:31:09+00:00
Hi if you like this check out my other creations and support me here
The Lisa series started off life as a design for a menorah but got sidetracked this is a return to the path, as I understand it this is more accuratly a Chanukkah Menorah (please feel free to correct me if this is not the case).
The use of tealights as the candles means that there is no problem with the candles burning down till they go out as tealights come with a built in heat shield.There is a dimple in the candle holder that keeps the flame away from contact with the plastic for extra assurance and the hole is enlarged (see detail pic).
You can use LED Tealights instead of burning ones for peace of mind - they will fit too.
I have printed this one in Vertigo Grey (Filimentum) and I think it looks great.
For FDM printers do not 'hollow out' as it needs the infill to support the base of the candle holders.
On my settings (recomended) print time is about one and a half days.
- Layer height 0.1mm
- Nozle width 0.4mm
- Walls 0.8mm
- Top/bottom thickness 1mm
- Infill 12% minimum, cubic
- Print speed 60mm/s
- Travel 60mm/s
- NO Support needed
- Brim or Raft adhesion (Raft makes removal a LOT easier)
| Date published | 31/08/2018 |
| Price | $5.50 |
| Time to do | 2160 - minutes |
| Material Quantity | 187grams |
| Dimensions | 194mm x 188.2mm x 138mm |
| Technology | FDM |
| Complexity | Easy |
| Support Free | YES |
Printed using a copper color PLA. Came out great!