PC Speaker Stand
PC Speaker Stand
3D
Published 2018-09-20T03:12:18+00:00
Wall Mount Stand for PC Speakers
This was a quick and dirty design and print to mount my PC speakers behind my new monitor setup. I printed two, one for left and right speakers. It includes cable chases for various orientations. For my purposes this turned out fantastic. I shared it in hopes someone else would find it useful or draw inspiration from it.
I have included my Simplify3D gcode file as well. Print Settings below.
Print Time: 1 hours 37 minutes
Filament: SolutTech PLA - Peach (a.k.a. Tan)
Bed Temp: 60c
Extruder Temp: 215c
Layer Height: 0.1mm
Top/Bottom Layers: 4
Perimeter Shells: 4
Infill: 30%
Infill Pattern: Rectilinear
Filament Length: 5069.8mm
Plastic Weight: 15.24g
Material Cost: $0.70
| Date published | 20/09/2018 |
| Time to do | - 127 minutes |
| Material Quantity | 15.24 |
| Support Free | YES |
