Printable LED Lamp
Printable LED Lamp
3D
Published 2019-03-24T09:35:30+00:00 • Remixed from Polypanels // Square, Polypanels // *Snaps Only*
This is a printable LED lamp with WS2812 LEDs. They can be powered via USB, power supply or with an Arduino.
Intructions and BOM can be found on Instructables
https://www.instructables.com/id/Printable-LED-Lamp
Here is the list with all necessary parts for the LED lamp
1x LED strip (I recommend at least 2m) https://goo.gl/rhQeVU
1x Power Switch https://goo.gl/r9jdaa
1x Power Connector (optional if you don't want to power via USB) https://goo.gl/fVH6To
1x Power Supply (optional if you don't want to power via USB) https://goo.gl/mFSSwo
6x M4 x 12mm screws https://goo.gl/kAHrfG
4x M3 x 6mm screws https://goo.gl/HWHKZd
Print all needed parts. The bottom needs support. Print it in the orientation you download
I used about 10%-20% infill.
Find the BOM and building instructions on Instructables.
https://www.instructables.com/id/Printable-LED-Lamp
| Date published | 24/03/2019 |
| Dimensions | 180mm x 180mm x 230mm |