MK2 Swole Y-Motor Damper Mount
MK2 Swole Y-Motor Damper Mount
3D
Published 2017-10-09T11:50:48+00:00
Y-Axis motor mount for Astrosyn MY17RMDAMP. Recommended revision is D.
Prototype (not available)
1. bracing against yaw torque from belt tension
2. widened mounting collar to be symmetric for easier assembly
Revision B added features
1. thinner body to reduce print time
2. offset mounting to accommodate Astrosyn damper while keeping stock mounting points
3. access hole if damper-to-motor screw (if damper is mounted first)
3. access hole for pulley grub screw
Revision C (no longer available)
1. much more robust body structure
2. widened grub screw access hole
3. more reinforced damper contact
Revision D
1. needed space for planned 90° chassis brace so shrunk brace
2. overbuild found unnecessary as chassis skew caused belt binding
3. Rev B works but could be bent when forced, rev D will break before bending
MeshMixer was used to provide support structure not Cura.
Note that Revision B should 100% infill.
CURA PRINT SETUP: ABS
QUALITY
Layer Height 0.15 mm (little bit faster)
SHELL
Wall Thickness 1.2 mm
Top/Bottom Thickness 1.2 mm
INFILL
Infill Density 50%
Infill Pattern Grid
MATERIAL
Printing Temperature 240°C
Build Plate Temperature 110°C
Flow 100%
Enable Retraction Checked
Retraction Distance 0.8 mm
SPEED (mm/s)
Print Speed 30
Travel Speed 90
Initial Layer Speed 15
Initial Layers Print Speed 15
Initial Layer Travel Speed 45
Maximum Z Speed 0
Number of Slower Layers 4
COOLING
Enable Print Cooling Checked
Fan Speed 40%
Regular Fan Speed 20%
Maximum Fan Speed 40%
Initial Fan Speed 0%
Regular Fan Speed at Layer 5
Lift Head Checked
SUPPORT
Generate Support Unchecked
BUILD PLATE ADHESION
Build Plate Adhesion Type "Brim"
Brim Width 8.0 mm
EXPERIMENTAL
Enable Ironing Checked (cleaner upper contact surface)
| Date published | 09/10/2017 |
| Time to do | - 462 minutes |
| Material Quantity | 35 g |
| Dimensions | 58.0 x 48.0 x 28.0 mm |
| Technology | FDM |
| Complexity | Very Easy |
| Support Free | YES |