S 2a - Shaft Ø25 with thread and teeth
S 2a - Shaft Ø25 with thread and teeth
Published 2019-06-05T17:15:57+00:00
Name: Shaft – S 2a
Length =80mm
Male/Female connector
Outer diameter = Ø25mm
Double thread -6mm pitch
Longitudinal teeth
Diagonal fixing Ø3mm holes
Ø12 cylindrical center hole
-
Can be used as a threaded shaft with R 2e -Ring (as screw and nut)
Can be used as a shaft with R 2g -Ring (as axial slide)
Can be used as a teeth-shaft with R 2a and R 2c -Ring (rotation locked)
-
Video: https://youtu.be/SE-CMSasueE
-
This module is part of the 'He-Ideas' mechanical building set
See more on my web-page https://he-ideas.weebly.com
I have printed this in PLA with the center axis in vertical direction and without support. Afterwards I have drilled up all the holes with a 3mm drill and worked the round grove slightly with a round rasp file. It might be necessary to treat the many 'tips' in the thread slightly with a file.
Date published | 05/06/2019 |
Support Free | YES |