SP EyeWear 2
4,381
views
245
downloads
3
collections
0 comments
Loading comments...
SP EyeWear 2
3D
Published 2017-02-17T19:07:43+00:00
24
0
Add to Collection
Description
An elegant design. The frame is ready to accept 6 base curve lenses.
Printing Details
For the best printing result it is advised to use PVA for support material. Otherwise, it is important to use the suggested settings below.
For the temples you do not have to use brim; the two small pads help to bed adhesion.
Cura Settings
Layer Hight : 0.1mm ( or 0.06mm)
Support : Yes
Support Density : 20%
Support Z Distance : 0.2mm
Support Horizontal Expansion : 0.5mm
Enable Support Interface : Yes
Support Interface Thickness : 0.4mm
Support Interface Density : 100%
Brim : 1mm (if you have adhesion problems)
Technical Information
Date published | 17/02/2017 |
Technology | FDM |
Complexity | Medium |
More Information
Object Parts