Switch Pro Holder_V2
35,718
views
2,863
downloads
26
collections
13 comments
Loading comments... 
Switch Pro Holder_V2
3D
Published 2017-04-10T11:13:15+00:00
563
13
Add to Collection
Description
This is a support for being able to play with your pro controller attatch to you switch ( because you dont like the other controller). This is the V1 so the desing and efficiency is good but not perfect but due to the time i got that was the first shot so it would probably have a V2.
for the print you will need 2 hex M4 bolt and 2 locknut
Technical Information
| Date published | 10/04/2017 |
| Time to do | - 552 minutes |
| Material Quantity | 113.76 |
| Dimensions | 37x110,5x80 |
More Information
Object Parts
I send you some photos ... not in order but hope it help you to mount the support. some advises: tighten the bolt to the correct tension to avoid moving when you use the small lever for adjustment. and for installing the switch and the controller, you need start with the top and finish with the bottom to lock it in place. I hope that was clear :P sorry for my bad english