Totally not a Cubone - Keychain
3,188
views
107
downloads
3
collections
0 comments
Loading comments...
Totally not a Cubone - Keychain
3D
Published 2017-12-11T13:58:34+00:00
21
0
Add to Collection
Description
"Totally not a Cubone" keychain, made by giving a small incision in the "Totally not a Cubone" model and removing the head from the body.
From a Zbrush file directly to your key holder.
Note: In the 3D viewer the file is on the vertical position, but when you open it in Simplify3D/Cura (or any other slicer) it should be in the correct position(horizontal).
Printing Details
Printed in Fillamentum Rapunzel Silver.
There is only need for supports in the hanging zones, like beneath the skull and the side hair.
0,2 mm layer, but lower will give better results
Bed - 55º
Nozzle - 200º
Infill - 10%
Speed - 55 mm/s
Supports - 14% infill
Technical Information
Date published | 11/12/2017 |
Time to do | 40 - minutes |
Material Quantity | 3,5 grams |
Dimensions | 38 x 41 x 43 mm |
Technology | FDM |
Complexity | Easy |
More Information
Object Parts