Tram - Melbourne Tram
Featured
7,496
views
436
downloads
2
collections
3 comments
Loading comments...
Tram - Melbourne Tram
3D
Published 2018-01-02T17:55:35+00:00
35
3
Add to Collection
Description
I wanted to use these motorised bogie from the Open-Railway project and make a Melbourne Tram.
Motorized bogie for OS-Railway - fully 3D-printable railway system
https://www.thingiverse.com/thing:2644082
Starting before the hot rod, I have learnt lots in doing the AEC double decker bus, this in essence is easier, alignment of sections is often the hardest part. The parts have all been split up to the different sections.
Edited:
• whole body of the tram
• new roof - number on correct side, added numbers
• trim for undertake tram - print two parts left and right
To do:
• transformer on the top of the tram
Printing Details
Layer Thickness 200 microns. InFill 20%.
Technical Information
Date published | 02/01/2018 |
Time to do | 680 - 740 minutes |
Material Quantity | 128 grams |
Dimensions | 240mm x 50mm x 55mm |
Technology | FDM |
Complexity | Medium |
More Information
Object Parts