joefarro's Print of The Mandalorian from Star Wars
Community Print 3D Print of The Mandalorian from Star Wars
Published 2020-01-27T21:28:36+00:00
1
0
Printed on: Creality Ender 3 Pro
Material: PLA
Description
Printed with no supports at 0.2mm on 0.4mm nozzle with Amazon basics PLA. 205/50 temp. This is just stunning...there are little bits of detail that are hard for me to photograph. Hoping to paint it but I may do a .12 version first. I used zigzag I fill at 5% and it cut the print time down to about seven hours (vs 24 with 20% grid at .12). Thankyou for such a great model!!